










BMW F800GS F700GS F650GS 2008-2018 Pannier rack.
Easy bolt on installation,comes with bolts.
Multiple use rack
1.mount hard cases like aluminium panniers,pelican cases,ammo cans
2.use it with any soft luggage,wolfman,nelson riggs and similar,mosko moto mounting plates can be drilled and installed.
3.mount rotopax gas cans on both sides.
Powder coated finish black hammertone.
Comes with hardware to install any hard case like tusk panniers or pelican type cases.
.Made in Canada by European craftsmen,comes with lifetime warranty
Installation
remove the seat
remove the passenger grab handle
remove the passenger footpegs
hold the rack in place and install the 70 mm bolt at the rear
install the 25 mm bolt which sits under the seat
install the 70 mm bolt with the 25 mm spacer between the rack and the footpeg bracket
make sure that you reinstall the passenger footpeg
install the other side the same way
install the rear connecting bar with 2 x25 mm bolts
How to install the cases on the racks install the racks on the bike and hold up the cases to the rack.mark the location with a sharpie remove the racks from the bike place the racks on the back of the cases,make sure they are symmetrical place the mounting brackets in place 2 at the bottom and 1 up in the middle drill the holes for the brackets,bolt on the brackets drill 2 more holes thru the 2 welded nuts,make sure that you do not damage the threads remove the rack from the case and drill these 2 holes again with a bigger drill,about 3/8 make sure the m8x25mm knobs fit thru install the rack on the bike and hang the cases on the rack install the knobs from the inside of the case,hand tighten only to secure the case to the rack use a washer |